Newton's Laws of Motion

Newton's First Law and Inertia
Momentum and its Applications

By the end of the lesson, the learner should be able to:
State Newton's first law of motion
-Define inertia and relate it to mass
-Explain the concept of balanced and unbalanced forces
-Give examples of Newton's first law in daily life
-Understand the need for seat belts and safety devices

In groups, learners are guided to:
Q/A review on forces from previous studies
-Demonstration: cardboard and coin experiment
-Demonstration: hitting bottom coin from stack
-Discussion on inertia and its relationship to mass
-Explanation of seat belts and safety devices in vehicles
-Analysis of forces acting on aircraft in flight

Cardboard
-Glass tumbler
-Coins
-Charts showing aircraft forces
-Pictures of safety devices
-Demonstration materials
-Balance
Calculator
-Toy cars of different masses
-Stopwatch
-Measuring tape
-Worked examples charts
-Problem worksheets

KLB Secondary Physics Form 3, Pages 65-67

Newton's Laws of Motion

Newton's Second Law of Motion

By the end of the lesson, the learner should be able to:
State Newton's second law of motion
-Derive the relationship F = ma
-Define the Newton as unit of force
-Understand rate of change of momentum
-Apply F = ma to solve problems

In groups, learners are guided to:
Q/A on momentum concepts
-Derivation of F = ma from Newton's second law
-Definition of the Newton using F = ma
-Demonstration using ticker-timer and trolley
-Worked examples applying F = ma
-Problem-solving session with force calculations

Ticker-timer
-Trolley
-Runway
-Elastic cords
-Masses
-Calculator
-Force diagrams
-Worked examples

KLB Secondary Physics Form 3, Pages 68-74

Newton's Laws of Motion

Experimental Verification of Newton's Second Law
Impulse and Change in Momentum
Newton's Third Law of Motion
Applications of Newton's Laws - Lifts and Apparent Weight

By the end of the lesson, the learner should be able to:
Investigate relationship between force and acceleration
-Investigate relationship between mass and acceleration
-Verify F = ma experimentally
-Analyze ticker-tape results
-Draw conclusions from experimental data
State Newton's third law of motion
-Understand action and reaction pairs
-Explain that forces occur in pairs
-Apply third law to various situations
-Analyze motion in different scenarios

In groups, learners are guided to:
Review F = ma through Q/A
-Experiment: Force vs acceleration (constant mass)
-Experiment: Mass vs acceleration (constant force)
-Analysis of ticker-tape patterns
-Data collection and graph plotting
-Discussion on experimental errors and improvements
Review impulse concepts through Q/A
-Demonstration: walking and floor interaction
-Demonstration: jumping from boat scenario
-Discussion on action-reaction pairs
-Examples from daily life: walking, swimming, rocket propulsion
-Problem-solving involving third law

Ticker-timer
-Trolley
-Ticker tape
-Elastic cords
-Various masses
-Scissors
-Graph paper
-Rulers
-Calculator
Graph paper
-Force-time graph examples
-Charts showing car safety features
-Sports equipment examples
-Worked examples
Books for pressure demonstration
-Spring balances
-Trolleys
-String
-Charts showing action-reaction examples
-Pictures of rockets and jets
Spring balance
-Mass
-Lift diagrams
-Calculator
-Free-body diagram charts
-Worked examples
-Problem worksheets

KLB Secondary Physics Form 3, Pages 69-71
KLB Secondary Physics Form 3, Pages 75-80

Newton's Laws of Motion

Conservation of Linear Momentum

By the end of the lesson, the learner should be able to:
State the law of conservation of momentum
-Apply conservation of momentum to collisions
-Distinguish between elastic and inelastic collisions
-Solve collision problems
-Understand momentum in explosions

In groups, learners are guided to:
Review lift problems through Q/A
-Statement and explanation of conservation of momentum
-Demonstration: colliding trolleys or balls
-Analysis of elastic and inelastic collisions
-Worked examples on collision problems
-Discussion on explosions and momentum conservation

Trolleys
-Plasticine
-Marbles
-Spring balance
-Measuring tape
-Stopwatch
-Calculator
-Collision demonstration apparatus

KLB Secondary Physics Form 3, Pages 80-86

Newton's Laws of Motion

Applications of Momentum Conservation - Rockets and Jets
Friction - Types and Laws

By the end of the lesson, the learner should be able to:
Explain rocket and jet propulsion
-Apply momentum conservation to propulsion systems
-Understand recoil velocity calculations
-Analyze garden sprinkler operation
-Solve recoil problems

In groups, learners are guided to:
Q/A review on momentum conservation
-Explanation of rocket propulsion principle
-Analysis of jet engine operation
-Calculation of recoil velocities
-Demonstration: balloon rocket or garden sprinkler
-Problem-solving on recoil scenarios

Balloons
-String
-Straws
-Garden sprinkler (if available)
-Charts showing rocket/jet engines
-Calculator
-Worked examples
Wooden blocks
-Different surfaces
-Spring balance
-Weights
-Lubricants
-Sandpaper
-Charts showing friction applications
-Ball bearings

KLB Secondary Physics Form 3, Pages 86-87

Newton's Laws of Motion

Viscosity and Terminal Velocity

By the end of the lesson, the learner should be able to:
Define viscosity and explain its effects
-Understand motion of objects through fluids
-Explain terminal velocity concept
-Analyze forces on falling objects in fluids
-Investigate factors affecting terminal velocity

In groups, learners are guided to:
Q/A on friction concepts
-Demonstration: steel ball falling through different liquids
-Explanation of viscous drag and terminal velocity
-Analysis of forces: weight, upthrust, and viscous drag
-Investigation of terminal velocity using glycerine
-Discussion on applications: parachutes, rain drops

Tall measuring cylinder
-Glycerine
-Steel ball bearings
-Water
-Stopwatch
-Rubber bands
-Ruler
-Different viscous liquids

KLB Secondary Physics Form 3, Pages 90-93

Work, Energy, Power and Machines
Current Electricity (II)

Gears and Hydraulic Systems
Efficiency of Machines
Electric Current and Measurement

By the end of the lesson, the learner should be able to:
Understand gear systems and their operation
-Calculate V.R. for gear systems
-Explain hydraulic lift principle
-Apply Pascal's principle to hydraulic systems
-Calculate M.A. and V.R. for hydraulic systems
Define electric current and state its SI unit
-Understand conventional current flow
-Use ammeters correctly to measure current
-Read ammeter scales accurately
-Understand current as rate of flow of charge

In groups, learners are guided to:
Review inclined planes through Q/A
-Demonstration: gear system operation
-Calculation of gear ratios and V.R.
-Explanation of hydraulic lift principle
-Demonstration: Pascal's principle using syringes
-Calculation of hydraulic system parameters
Q/A review on basic electricity from Form 2
-Definition of electric current and conventional flow
-Demonstration: proper ammeter connection in series
-Practice reading different ammeter scales
-Discussion on digital vs analogue meters
-Safety precautions when using electrical equipment

Gear wheels
-Bicycle for gear demonstration
-Syringes of different sizes
-Water
-Tubes
-Calculator
-Hydraulic system diagrams
-Gear ratio charts
Various machines for testing
-Spring balances
-Measuring tape
-Stopwatch
-Efficiency measurement setup
-Lubricants for demonstration
Ammeters (analogue and digital)
-Dry cells
-Connecting wires
-Bulbs
-Switches
-Ammeter scale charts
-Safety equipment

KLB Secondary Physics Form 3, Pages 116-119
KLB Secondary Physics Form 3, Pages 126-130

Current Electricity (II)

Series and Parallel Circuits - Current Distribution
Potential Difference and Voltage Measurement

By the end of the lesson, the learner should be able to:
Investigate current in series circuits
-Investigate current in parallel circuits
-Apply Kirchhoff's current law
-Understand current division in parallel circuits
-Solve problems involving current distribution

In groups, learners are guided to:
Review ammeter usage through Q/A
-Experiment: measuring current in series circuit
-Experiment: measuring current in parallel circuit
-Analysis of current readings and patterns
-Statement of Kirchhoff's current law
-Problem-solving on current distribution

Multiple ammeters
-Bulbs
-Connecting wires
-Dry cells
-Switches
-Circuit boards
-Calculator
-Current distribution worksheets
Voltmeters (analogue and digital)
-Resistors
-Voltmeter scale charts
-Work and charge demonstration materials

KLB Secondary Physics Form 3, Pages 130-133

Current Electricity (II)

Series and Parallel Circuits - Voltage Distribution

By the end of the lesson, the learner should be able to:
Investigate voltage in series circuits
-Investigate voltage in parallel circuits
-Apply Kirchhoff's voltage law
-Understand voltage division in series circuits
-Solve problems involving voltage distribution

In groups, learners are guided to:
Review voltage measurement through Q/A
-Experiment: measuring voltage across series components
-Experiment: measuring voltage across parallel components
-Analysis of voltage readings and patterns
-Statement of Kirchhoff's voltage law
-Problem-solving on voltage distribution

Multiple voltmeters
-Various resistors
-Connecting wires
-Dry cells
-Switches
-Circuit boards
-Calculator
-Voltage distribution worksheets

KLB Secondary Physics Form 3, Pages 130-133

Current Electricity (II)

Ohm's Law - Investigation and Verification
Electrical Resistance and Ohm's Law Applications

By the end of the lesson, the learner should be able to:
State Ohm's law
-Investigate relationship between voltage and current
-Plot V-I graphs for ohmic conductors
-Verify Ohm's law experimentally
-Understand conditions for Ohm's law validity

In groups, learners are guided to:
Q/A on voltage distribution
-Experiment: varying voltage and measuring current through resistor
-Data collection and table completion
-Plotting V-I graph and analyzing slope
-Statement and verification of Ohm's law
-Discussion on temperature and other conditions

Rheostat
-Ammeter
-Voltmeter
-Resistor coils
-Connecting wires
-Dry cells
-Graph paper
-Calculator
-Ruler
Calculator
-Ohm's law triangle charts
-Resistor color code charts
-Various resistors
-Multimeter
-Problem worksheets
-Unit conversion charts

KLB Secondary Physics Form 3, Pages 131-135

Current Electricity (II)

Ohmic and Non-Ohmic Conductors
Types of Resistors and Their Applications
Measurement of Resistance - Voltmeter-Ammeter Method

By the end of the lesson, the learner should be able to:
Distinguish between ohmic and non-ohmic conductors
-Investigate V-I characteristics of different materials
-Understand why some materials don't obey Ohm's law
-Analyze V-I graphs for various conductors
-Identify practical applications of non-ohmic conductors
Describe voltmeter-ammeter method
-Set up circuits for resistance measurement
-Calculate resistance from V and I readings
-Understand limitations of the method
-Analyze experimental errors

In groups, learners are guided to:
Q/A on Ohm's law applications
-Experiment: V-I characteristics of filament bulb
-Experiment: V-I characteristics of diode
-Comparison of different V-I graph shapes
-Discussion on temperature effects on resistance
-Applications of non-ohmic conductors
Q/A on resistor types
-Setup of voltmeter-ammeter circuit
-Measurement of voltage and current for unknown resistor
-Calculation of resistance using R = V/I
-Discussion on measurement errors and accuracy
-Comparison with multimeter readings

Filament bulbs
-Diodes
-Thermistors
-LDR
-Ammeter
-Voltmeter
-Rheostat
-Graph paper
-Various conductors for testing
Various resistor types
-Color code charts
-Potentiometer
-Thermistor
-Multimeter
-Circuit boards
-Application examples
Unknown resistors
-Voltmeter
-Ammeter
-Rheostat
-Connecting wires
-Dry cells
-Switches
-Calculator
-Multimeter for comparison

KLB Secondary Physics Form 3, Pages 134-135
KLB Secondary Physics Form 3, Pages 140-142

Current Electricity (II)

Wheatstone Bridge Method
Resistors in Series - Theory and Calculations

By the end of the lesson, the learner should be able to:
Understand the principle of Wheatstone bridge
-Set up Wheatstone bridge circuit
-Balance the bridge for resistance measurement
-Calculate unknown resistance using bridge equation
-Appreciate accuracy of Wheatstone bridge method

In groups, learners are guided to:
Review voltmeter-ammeter method through Q/A
-Introduction to Wheatstone bridge principle
-Demonstration of bridge balance condition
-Setup and operation of Wheatstone bridge
-Calculation using R₁/R₂ = R₃/R₄
-Comparison of accuracy with other methods

Wheatstone bridge apparatus
-Galvanometer
-Known resistors
-Unknown resistors
-Connecting wires
-Battery
-Calculator
-Bridge equation charts
Resistors of known values
-Multimeter
-Circuit boards
-Series circuit diagrams
-Problem worksheets

KLB Secondary Physics Form 3, Pages 142-144

Current Electricity (II)

Resistors in Parallel - Theory and Calculations

By the end of the lesson, the learner should be able to:
Derive formula for resistors in parallel
-Calculate total resistance for parallel combination
-Understand current and voltage in parallel circuits
-Solve problems involving parallel resistors
-Apply parallel resistance in circuit analysis

In groups, learners are guided to:
Review series resistance through Q/A
-Derivation of 1/Rp = 1/R₁ + 1/R₂ + 1/R₃...
-Demonstration: measuring total resistance of parallel combination
-Analysis of voltage (same) and current (divided) in parallel
-Worked examples on parallel resistance calculations
-Problem-solving session

Resistors of known values
-Multimeter
-Connecting wires
-Circuit boards
-Calculator
-Parallel circuit diagrams
-Problem worksheets

KLB Secondary Physics Form 3, Pages 147-150

Current Electricity (II)

Mixed Circuits - Series-Parallel Combinations
Electromotive Force (EMF) and Terminal Voltage

By the end of the lesson, the learner should be able to:
Analyze circuits with series-parallel combinations
-Apply reduction techniques to complex circuits
-Calculate total resistance of mixed circuits
-Determine current and voltage in different branches
-Solve complex circuit problems

In groups, learners are guided to:
Q/A on parallel resistance
-Introduction to mixed circuit analysis techniques
-Step-by-step reduction of complex circuits
-Worked examples on series-parallel combinations
-Problem-solving on mixed circuits
-Discussion on circuit analysis strategies

Various resistors
-Circuit boards
-Connecting wires
-Multimeter
-Calculator
-Complex circuit diagrams
-Step-by-step analysis charts
High resistance voltmeter
-Various cells
-Switches
-Resistors
-EMF measurement setup
-Energy conversion charts

KLB Secondary Physics Form 3, Pages 150-153

Current Electricity (II)

Internal Resistance of Cells
Cells in Series and Parallel
Advanced Circuit Analysis and Problem Solving

By the end of the lesson, the learner should be able to:
Define internal resistance
-Understand the relationship E = V + Ir
-Calculate internal resistance experimentally
-Understand factors affecting internal resistance
-Apply internal resistance in circuit calculations
Analyze cells connected in series
-Analyze cells connected in parallel
-Calculate total EMF and internal resistance
-Understand advantages of different connections
-Solve problems involving cell combinations

In groups, learners are guided to:
Q/A on EMF concepts
-Introduction to internal resistance concept
-Derivation of E = V + Ir relationship
-Experiment: measuring internal resistance using different loads
-Plotting E vs R graph to find internal resistance
-Discussion on factors affecting internal resistance
Review internal resistance through Q/A
-Analysis of identical cells in series connection
-Analysis of identical cells in parallel connection
-Calculation of equivalent EMF and internal resistance
-Discussion on practical applications and advantages
-Problem-solving on cell combinations

Various cells
-Resistors of different values
-Voltmeter
-Ammeter
-Connecting wires
-Graph paper
-Calculator
-Internal resistance apparatus
Multiple identical cells
-Connecting wires
-Voltmeter
-Ammeter
-Resistors
-Calculator
-Cell combination diagrams
-Problem worksheets
Complex circuit examples
-Circuit analysis worksheets
-Multiple EMF sources
-Various resistors
-Comprehensive problem sets
-Kirchhoff's law charts

KLB Secondary Physics Form 3, Pages 150-153
KLB Secondary Physics Form 3, Pages 152-153

Waves II

Properties of waves
Reflection of waves
Refraction of waves

By the end of the lesson, the learner should be able to:
Define wavelength, frequency, amplitude and wavefront
- Explain rectilinear propagation of waves
- Describe wave production in ripple tank
- Calculate wave speed using v=fλ

In groups, learners are guided to:
Q/A on wave basics from Form 2
- Demonstration of wave production using ripple tank
- Observation of rectilinear propagation
- Calculations on wave speed

Ripple tank, Straight vibrator, Water, Rulers, Stroboscope, Charts on wave properties
Ripple tank, Plane wave generator, Curved and straight reflectors, Graph paper, Pencils
Ripple tank, Glass plates, Water, Rulers for measurement, Frequency generator

KLB Secondary Physics Form 3, Pages 156-158

Waves II

Diffraction of waves
Interference patterns
Constructive and destructive interference
Stationary waves formation

By the end of the lesson, the learner should be able to:
Define diffraction
- Explain factors affecting extent of diffraction
- Describe experiments showing diffraction
- Compare diffraction through different gap sizes

In groups, learners are guided to:
Demonstration of diffraction using various gap sizes
- Observation of spreading effect
- Investigation of relationship between gap size and wavelength
- Practical measurements

Ripple tank, Barriers with gaps, Various gap sizes, Measuring instruments, Wave generator
Two-point sources, Graph paper, Compass, Rulers, Ripple tank setup, Audio frequency generator
Two loudspeakers, Audio generator, Microphone, Sound level meter, Connecting wires
Tuning fork, String, Pulley, Weights, Stroboscope, Measuring tape, Retort stands

KLB Secondary Physics Form 3, Pages 163-165

Waves II

Modes of vibration in strings
Vibrating air columns - closed pipes

By the end of the lesson, the learner should be able to:
Derive expressions for fundamental frequency
- Explain harmonics and overtones
- Calculate frequencies of overtones
- Demonstrate different modes

In groups, learners are guided to:
Discussion on fundamental and overtone frequencies
- Mathematical derivation of frequency formulas
- Practical demonstration of string vibrations
- Problem solving

Sonometer, Tuning forks, Weights, Measuring instruments, Calculator, Formula charts
Closed pipes of various lengths, Tuning forks, Water, Measuring cylinders, Resonance tubes

KLB Secondary Physics Form 3, Pages 170-172

Waves II
Electrostatics II
Electrostatics II

Vibrating air columns - open pipes
Electric field patterns and charge distribution
Lightning arrestor and capacitance introduction
Factors affecting capacitance and types of capacitors
Capacitors in series and parallel
Energy stored in capacitors

By the end of the lesson, the learner should be able to:
Compare open and closed pipe resonance
- Derive frequency formulas for open pipes
- Explain harmonic series differences
- Solve numerical problems
Investigate effect of plate separation, area and dielectric on capacitance
- Derive capacitance formula C = εA/d
- Describe paper, electrolytic and variable capacitors
- Explain construction principles

In groups, learners are guided to:
Experiment with open pipe resonance
- Comparison with closed pipe results
- Mathematical problem solving
- Summary of all wave phenomena
Experiment varying plate separation and area
- Investigation using different dielectric materials
- Mathematical derivation of capacitance formula
- Examination of different capacitor types and their construction

Open pipes, Tuning forks, Sound level meters, Calculators, Summary charts, Past papers
High voltage source, Wire electrodes, Petri-dish, Castor oil, Chalk dust, Spherical and pear-shaped conductors, Proof-plane, Gold-leaf electroscope
Wind-mill model, Point charges, Lightning arrestor photos, Parallel-plate capacitors, Battery, Voltmeter, Milliammeter
Aluminium plates, Various dielectric materials, Electroscope, Paper capacitors, Electrolytic capacitors, Variable air capacitors, Measuring instruments
Capacitors of different values, Voltmeters, Ammeters, Battery, Connecting wires, Calculators, Circuit boards
Charged capacitors, Energy calculation worksheets, Graphing materials, Calculators, Safety equipment

KLB Secondary Physics Form 3, Pages 174-176
KLB Secondary Physics Form 3, Pages 185-188

Electrostatics II

Complex capacitor problems
Applications of capacitors

By the end of the lesson, the learner should be able to:
Solve problems involving mixed series and parallel combinations
- Calculate charges, voltages and energies in complex circuits
- Apply energy conservation principles
- Analyze capacitor charging and discharging

In groups, learners are guided to:
Problem solving with complex capacitor networks
- Analysis of charging and discharging processes
- Energy transfer calculations
- Graph interpretation of charging curves

Complex circuit diagrams, Advanced problem worksheets, Graphing materials, Calculators, Past examination papers
Circuit diagrams, Smoothing circuit demo, Radio tuning circuits, Camera flash unit, Revision charts, Past examination papers

KLB Secondary Physics Form 3, Pages 188-193