FORAGE CROPS

Introduction and pasture classification

By the end of the lesson, the learner should be able to:
Define forage crops and distinguish between forage and fodder crops. Define pasture and classify pastures according to stand, establishment and ecological zones. Explain the difference between natural and artificial pastures. Give examples of pastures at different altitudes.

Exposition of forage concepts. Discussion on pasture classification. Examination of grass and legume specimens from different zones.

Charts showing pasture classification, specimens of grasses and legumes, altitude maps

KLB BK III Pg 218-222

FORAGE CROPS

Pasture establishment and planting materials
Fertilizer application and legume inoculation

By the end of the lesson, the learner should be able to:
Describe methods of pasture establishment using seeds, rhizomes and splits. Explain land preparation procedures for pastures. Outline sowing methods including direct sowing, undersowing and oversowing. State seed rates and quality standards for pasture crops.

Demonstration of land preparation and establishment methods. Discussion on sowing method selection. Examination of different planting materials.

Farm tools, pasture seeds, rhizomes, splits, charts showing sowing methods
Fertilizer samples, rhizobium inoculant, charts showing nitrogen fixation, legume nodules

KLB BK III Pg 222-226

FORAGE CROPS

Pasture management practices
Pasture utilization and defoliation

By the end of the lesson, the learner should be able to:
Identify effects of weeds on pasture productivity and explain control measures. Describe top dressing procedures and reasons. Explain topping, reseeding and controlled grazing methods. State pest control measures in pastures.

Brain storming on weed problems and management practices. Discussion on fertilizer selection and grazing control. Demonstration of management principles.

Pictures of pasture weeds, fertilizer samples, slashing tools, charts showing management practices
Charts showing defoliation effects, pasture quality samples, grazing schedules

KLB BK III Pg 227-230

FORAGE CROPS

Carrying capacity and grazing systems
Napier grass production

By the end of the lesson, the learner should be able to:
Define carrying capacity and stocking rate. Calculate carrying capacity based on animal requirements. Compare rotational and continuous grazing systems. Explain paddocking, strip grazing, tethering and zero grazing methods.

Calculation exercises on stocking rates. Discussion on grazing system selection. Examination of grazing system diagrams.

Calculators, carrying capacity charts, paddocking diagrams, pictures of grazing methods
Napier grass specimens, stem cuttings with nodes, fertilizer samples, cutting tools

KLB BK III Pg 232-237

FORAGE CROPS

Other fodder crops
Agroforestry fodder and conservation introduction

By the end of the lesson, the learner should be able to:
Explain ecological requirements for Guatemala grass and mangolds. Describe characteristics and management of Kenya white clover. Outline establishment and utilization of lucerne and desmodium varieties. State advantages of leguminous fodder crops.

Discussion on fodder crop selection. Examination of various fodder crop specimens. Brain storming on nitrogen fixation benefits.

Guatemala grass specimens, mangold samples, clover and lucerne specimens, desmodium varieties
Leucaenia and calliandra samples, charts showing conservation methods, seasonal feed charts

KLB BK III Pg 240-244

FORAGE CROPS

Hay making

By the end of the lesson, the learner should be able to:
Describe hay making procedures and steps. Outline factors determining hay quality including species and harvesting stage. Explain proper drying and storage methods for hay. State advantages and disadvantages of hay making.

Discussion on hay making steps. Exposition of quality factors. Brain storming on quality maintenance during storage.

Hay samples, charts showing hay making process, storage equipment diagrams

KLB BK III Pg 245-247

FORAGE CROPS

Silage making and silo types

By the end of the lesson, the learner should be able to:
Describe silage making process and advantages over hay. Compare different types of silos including trench, clamp and tower silos. Explain steps followed in making silage. State principles of silage preservation and fermentation.

Discussion on silage advantages. Examination of silo diagrams. Exposition of fermentation principles and preservation.

Charts showing silo types, silage samples, fermentation diagrams, pH testing materials

KLB BK III Pg 247-249

FORAGE CROPS

Silage quality and requirements calculation

By the end of the lesson, the learner should be able to:
Explain factors affecting silage quality and use of additives. Describe silage losses and prevention methods. Calculate silage requirements based on animal dry matter needs. Outline standing forage as alternative conservation method.

Calculation exercises on silage requirements. Discussion on quality factors and additive use. Brain storming on loss prevention strategies.

Calculators, silage quality charts, additive samples, measurement tools, calculation worksheets

KLB BK III Pg 249-250

LIVESTOCK HEALTH III

Introduction to livestock diseases and observable conditions
Terms used in livestock diseases

By the end of the lesson, the learner should be able to:
Define disease and distinguish between symptoms and signs. Identify observable conditions for detecting disease including pulse rate, temperature, and body condition. Explain disease-causing organisms and predisposing factors. State the role of vectors in disease transmission.

Exposition of disease concepts. Discussion on disease symptoms. Brain storming on predisposing factors. Demonstration of animal observation techniques.

Charts showing disease symptoms, thermometer, pictures of sick animals, disease organism diagrams
Charts showing immunity types, vaccine samples, timeline charts for incubation periods

KLB BK III Pg 250-251

LIVESTOCK HEALTH III

Classification and protozoan diseases - ECF and anaplasmosis
Protozoan diseases - coccidiosis and trypanosomiasis

By the end of the lesson, the learner should be able to:
Classify livestock diseases into four major groups. Describe East Coast Fever including animals affected and symptoms. Explain anaplasmosis (gall sickness) symptoms and transmission. State control measures for tick-borne diseases.

Exposition of disease classification. Discussion on protozoan diseases. Examination of tick specimens. Brain storming on tick control methods.

Disease classification charts, tick specimens, pictures of ECF symptoms, maps showing disease distribution
Pictures of coccidiosis symptoms, tsetse fly specimens, maps showing trypanosomiasis areas, drug samples

KLB BK III Pg 252-254

LIVESTOCK HEALTH III

Bacterial diseases - mastitis
Bacterial diseases - fowl typhoid and foot rot

By the end of the lesson, the learner should be able to:
Describe mastitis as inflammation of mammary glands. Identify predisposing factors for mastitis including age and udder attachment. Explain symptoms of mastitis including milk changes. Outline control and treatment methods for mastitis.

Discussion on mastitis importance. Examination of mastitis symptoms. Demonstration of proper milking techniques. Brain storming on prevention methods.

Pictures of mastitis symptoms, milk samples showing mastitis, milking equipment, antibiotic samples
Pictures of fowl typhoid symptoms, foot rot specimens, hoof trimming tools, foot bath chemicals

KLB BK III Pg 255-257

LIVESTOCK HEALTH III

Bacterial diseases - contagious abortion and scours
Bacterial diseases - black quarter, anthrax and pneumonia

By the end of the lesson, the learner should be able to:
Describe contagious abortion (brucellosis) as zoonotic disease. Explain symptoms including abortion and retained placenta. Describe scours in young animals and predisposing factors. Outline control measures including vaccination and hygiene.

Discussion on zoonotic diseases. Case study of brucellosis control. Examination of scours symptoms. Brain storming on young animal management.

Charts showing brucellosis transmission, pictures of scours symptoms, vaccination schedules, hygiene materials
Pictures of black quarter symptoms, anthrax control procedures, vaccination equipment, ventilation diagrams

KLB BK III Pg 259-261

LIVESTOCK HEALTH III

Viral diseases - rinderpest and foot and mouth disease

By the end of the lesson, the learner should be able to:
Describe rinderpest as highly contagious notifiable disease. Explain foot and mouth disease transmission and symptoms. Identify animals affected by viral diseases. Outline control measures including vaccination and quarantine.

Discussion on viral disease characteristics. Examination of viral disease symptoms. Brain storming on quarantine importance. Case study of disease outbreaks.

Pictures of rinderpest symptoms, foot and mouth disease lesions, quarantine procedures, vaccination records

KLB BK III Pg 263-265

LIVESTOCK HEALTH III

Viral diseases - Newcastle, fowl pox and Gumboro

By the end of the lesson, the learner should be able to:
Describe Newcastle disease symptoms and high mortality. Explain fowl pox types including cutaneous and diphtheritic forms. Describe Gumboro disease affecting immune system. State control measures for poultry viral diseases.

Discussion on poultry viral diseases. Examination of fowl pox lesions. Brain storming on vaccination schedules. Case study of Gumboro (poultry AIDS).

Pictures of Newcastle symptoms, fowl pox lesions, Gumboro symptoms, poultry vaccination equipment

KLB BK III Pg 265-267

LIVESTOCK HEALTH III

Viral diseases - African swine fever

By the end of the lesson, the learner should be able to:
Describe African swine fever as highly contagious disease of pigs. Explain transmission through direct contact and vectors. Identify symptoms including fever and respiratory distress. Outline control measures including quarantine and culling.

Discussion on swine diseases. Case study of African swine fever outbreaks. Brain storming on pig management. Exposition of disease control strategies.

Pictures of African swine fever symptoms, pig management charts, quarantine procedures, disease control equipment

KLB BK III Pg 267-268

LIVESTOCK HEALTH III
LIVESTOCK PRODUCTION V (POULTRY)

Nutritional disorders - milk fever and bloat
Composition of an egg

By the end of the lesson, the learner should be able to:
Describe milk fever as calcium deficiency in dairy cows. Explain symptoms including muscle twitching and paralysis. Describe bloat as gas accumulation in rumen. Outline treatment methods including calcium injection and gas release techniques.

Discussion on nutritional disorders. Demonstration of calcium injection principles. Brain storming on nutritional management. Case study of bloat treatment.

Calcium injection equipment, charts showing milk fever symptoms, bloat treatment tools, nutritional supplements
Eggs, Chart showing parts of an egg, Drawing materials, Magnifying glass, Rulers for measurement

KLB BK III Pg 268-270

LIVESTOCK PRODUCTION V (POULTRY)

Incubation of eggs - Selection characteristics
Egg candling

By the end of the lesson, the learner should be able to:
State characteristics of eggs for incubation. List factors to consider when selecting eggs for incubation. Examine internal condition of eggs through candling.

Q/A on egg selection criteria. Practical activity - examining eggs for selection. Discussion on weight, size, and shape requirements. Hands-on evaluation of egg quality for incubation. Recording selection criteria observations.

Eggs of various conditions, Weighing scale, Measuring tools, Record sheets, Selection criteria charts
Cardboard boxes, Torch, Electric bulb, Candles, Dark room setup, Observation sheets

KLB Secondary Agriculture Form 4, Pages 3-4

LIVESTOCK PRODUCTION V (POULTRY)

Natural incubation
Artificial incubation - Conditions

By the end of the lesson, the learner should be able to:
State merits and demerits of natural incubation. Identify management practices of natural incubation. Describe signs of broodiness in hens. Explain preparation of nesting boxes for broody hens.

Q/A on natural incubation signs and management. Discussion on advantages and disadvantages. Practical demonstration of nesting box preparation. Role-play managing broody hens. Setting up proper nesting environment with appropriate materials. Problem-solving scenarios for natural incubation challenges.

Nesting box, Nesting materials (dry grass, sawdust), Debe containers, Sample nest setups, Broody hen management guides
Artificial incubator model, Thermometer, Water trays, Ventilation materials, Damp cloths, Eggs for turning

KLB Secondary Agriculture Form 4, Pages 5-6

LIVESTOCK PRODUCTION V (POULTRY)

Management of an incubator
Sources of chicks and brooding introduction

By the end of the lesson, the learner should be able to:
Highlight management practices of an incubator. State merits and demerits of artificial incubation. Explain daily management routines. Identify and solve common incubation problems.

Brain storming on incubator management practices. Practical demonstration of daily management procedures. Setting up incubation schedules and record keeping. Hands-on cleaning and disinfection procedures. Problem-solving common incubation failures and solutions. Cost-benefit analysis of artificial vs natural incubation.

Incubator, Disinfectants, Cleaning materials, Management record sheets, Timer, Cost comparison charts
List of chick suppliers in Kenya, Transport cost charts, Chick quality assessment guides, Presentation materials

KLB Secondary Agriculture Form 4, Pages 8-9

LIVESTOCK PRODUCTION V (POULTRY)

Artificial brooding - Requirements and preparation
Brooder management and chick care

By the end of the lesson, the learner should be able to:
Identify requirements for an artificial brooder. Explain brooder preparation procedures before chicks arrive. Describe equipment needed for brooding. Set up proper brooding environment.

Exposition and probing questions on brooder requirements. Practical demonstration of brooder setup and preparation. Hands-on installation of heat sources (32°C-35°C first week). Setting up feeders, waterers, and proper spacing. Preparation of newspapers and litter materials. Testing all equipment before chick arrival.

Artificial brooder, Heat sources (electric bulbs, charcoal burner), Wire guards, Thermometer, Newspapers, Litter materials, Feeders, Waterers
Chick mash samples, Feeders, Waterers, Vaccination charts, Behavior observation sheets, Feed calculation worksheets, Thermometer

KLB Secondary Agriculture Form 4, Pages 7-8

LIVESTOCK PRODUCTION V (POULTRY)

Rearing of growers, layers and broilers

By the end of the lesson, the learner should be able to:
Discuss rearing of growers, layers and broilers. Compare feeding requirements for different bird categories. Calculate feed consumption and space requirements. Plan transition from brooder to grower stage.

Exposition and probing questions on different rearing stages. Discussion on grower mash (16-17% D.C.P.) vs layer mash (14-16% D.C.P.) vs broiler feeds. Practical calculation of daily feed requirements (120g per layer). Problem-solving feeding program transitions. Creating management schedules for different bird categories. Space calculation exercises.

Feed samples (grower, layer, broiler mash), Calculators, Rearing comparison charts, Feed calculation worksheets, Space requirement guides

KLB Secondary Agriculture Form 4, Pages 10-12

LIVESTOCK PRODUCTION V (POULTRY)

Free range rearing system

By the end of the lesson, the learner should be able to:
State factors considered when choosing a rearing system. Identify requirements for free-range system. State merits and demerits of free range system. Calculate stocking density (not exceeding 1000 birds per hectare).

Q/A on system selection factors (land, topography, labor, capital, security, market, knowledge). Discussion on free range requirements - land size, fencing, runs, movable houses. Practical calculation of land needs (100 birds need 0.4 hectare). Cost-benefit analysis comparing with other systems. Problem-solving free range management challenges.

Free range system charts, Measuring tape, Calculators, Fencing materials samples, Land calculation worksheets, Cost comparison sheets

KLB Secondary Agriculture Form 4, Pages 12-15

LIVESTOCK PRODUCTION V (POULTRY)

Fold system

By the end of the lesson, the learner should be able to:
Describe fold system. State merits and demerits of fold systems. Design fold specifications (3.5m long, 1.5m wide, 1.5m high). Calculate number of birds per fold (10-15 hens per fold).

Q/A and discussion on fold system principles and portability. Practical measurement and design of fold dimensions. Drawing scaled fold designs with roofed and open sections. Calculation exercises for fold numbers needed for given flock size. Discussion on daily movement requirements and labor implications. Problem-solving fold construction and management issues.

Fold design materials, Wire mesh samples, Measuring tools, Construction planning sheets, Calculators, Model building materials

KLB Secondary Agriculture Form 4, Pages 15-16

LIVESTOCK PRODUCTION V (POULTRY)

Deep litter system

By the end of the lesson, the learner should be able to:
Describe the requirements for deep litter system. State merits and demerits of deep litter systems. Calculate space requirements (1 sq m per 2-3 birds). Plan litter management and house specifications.

Q/A and discussion on deep litter system requirements. Practical demonstration of litter preparation (15-30cm deep) using sawdust, wood shavings. Calculation of space allocation and bird density. Design of house layout with proper ventilation (60-90cm opening above ground). Problem-solving litter management challenges including moisture control and turning.

Deep litter materials (sawdust, wood shavings, crushed maize cobs), House design materials, Calculators, Ventilation planning guides, Moisture control charts

KLB Secondary Agriculture Form 4, Pages 16-18

LIVESTOCK PRODUCTION V (POULTRY)

Battery cage system

By the end of the lesson, the learner should be able to:
Describe the requirements for battery cage system. Calculate cage specifications and arrangements. Compare battery system with other systems. Design cage layout with proper spacing (0.2 square meter per bird).

Q/A and discussion on battery cage principles and intensive management. Practical measurement and design of cage dimensions (45cm wide, 45cm high, 57.5cm deep). Calculation exercises for tier arrangements (3-6 tiers) and bird capacity. Drawing scaled cage arrangements with feeding and watering systems. Cost analysis comparing initial investment with returns. Problem-solving cage management and mechanization issues.

Battery cage models, Wire mesh samples, Measuring equipment, Calculators, Cage design worksheets, Cost analysis sheets

KLB Secondary Agriculture Form 4, Pages 18-19

LIVESTOCK PRODUCTION V (POULTRY)

Factors affecting egg production - Stress

By the end of the lesson, the learner should be able to:
State causes of stress in birds. Outline stress management practices. Identify effects of stress on egg production. Plan stress reduction strategies for poultry farms.

Discussion on stress causes (sudden changes, strangers, handling, noise, weather, diseases, lack of feed/water). Practical identification of stress symptoms in birds. Problem-solving stress management scenarios. Group work on creating stress-free environments. Planning daily routines to minimize stress. Development of emergency procedures for stress situations.

Stress identification charts, Case study materials, Management planning sheets, Emergency procedure guides, Poultry behavior observation sheets

KLB Secondary Agriculture Form 4, Pages 19-20

LIVESTOCK PRODUCTION V (POULTRY)

Vices in poultry

By the end of the lesson, the learner should be able to:
Identify causes of vices such as egg eating and cannibalism. Explain measures taken to control vices. Demonstrate debeaking procedures. Plan vice prevention programs.

Discussion on causes and control of egg eating (broken eggs, bright lights, idleness, inadequate nests, mineral deficiency). Analysis of cannibalism causes (parasites, overcrowding, bright light, prolapse, mineral deficiency, new birds). Demonstration of debeaking procedures using models. Problem-solving vice prevention strategies. Creating management plans to eliminate vice-causing conditions.

Charts showing poultry vices and symptoms, Debeaking equipment models, Vice prevention planning sheets, Case study examples, Control measure guides

KLB Secondary Agriculture Form 4, Pages 20-22

LIVESTOCK PRODUCTION V (POULTRY)

Culling birds

By the end of the lesson, the learner should be able to:
Define the term culling. Give reasons for culling of birds. Identify characteristics of good and poor layers. Demonstrate proper culling procedures and record keeping.

Brain storming on culling importance and economic benefits. Practical observation and identification of characteristics of good layers vs poor layers. Discussion on culling criteria (production records, physical examination, behavior). Record keeping for culling decisions and flock improvement. Problem-solving culling schedules and replacement planning. Cost-benefit analysis of culling programs.

Live birds for observation (if available), Culling record sheets, Production record examples, Culling criteria charts, Cost-benefit calculation sheets

KLB Secondary Agriculture Form 4, Page 22

LIVESTOCK PRODUCTION V (POULTRY)

Marketing eggs

By the end of the lesson, the learner should be able to:
State factors considered in sorting and grading eggs for fresh markets. Explain egg packing procedures with broad end upward. Calculate marketing costs, profits and pricing strategies.

Teacher's demonstrations on egg sorting by cleanliness, size (small, medium, large), and candling quality. Practical exercise in egg classification and grading. Hands-on egg packing using proper techniques (30 eggs per tray, 10 trays per box). Discussion on marketing channels and pricing strategies. Cost-benefit calculations including transport and packaging costs. Problem-solving marketing challenges and seasonal price variations.

Eggs of various sizes and quality, Egg trays (30-egg capacity), Egg boxes, Grading equipment, Calculators, Market price analysis sheets, Packaging cost worksheets

KLB Secondary Agriculture Form 4, Pages 22-23

LIVESTOCK PRODUCTION V (POULTRY)

Processing chicken meat

By the end of the lesson, the learner should be able to:
Outline methods of killing a bird (neck dislocation, sharp knife). Describe dressing of a bird's carcass. Explain proper slaughtering procedures with 12-hour starvation. Demonstrate packaging for market sale.

Topic review and teacher's demonstrations of humane killing methods. Practical demonstration of neck dislocation and knife cutting techniques using models. Step-by-step carcass dressing procedures (plucking, singeing, removing neck and crop, organ removal). Discussion on food safety, hygiene standards, and packaging in polythene bags. Problem-solving processing challenges and quality control. Cost calculation for processing operations and profit margins.

Demonstration models, Processing equipment models, Sharp knives (demonstration only), Safety and hygiene materials, Packaging materials, Processing cost calculation sheets

KLB Secondary Agriculture Form 4, Pages 23-25

LIVESTOCK PRODUCTION VI (CATTLE)

Raising of the young stock - Colostrum
Methods of calf rearing

By the end of the lesson, the learner should be able to:
Explain the importance of feeding calves on colostrum. Prepare artificial colostrum. State qualities of colostrum.

Q/A on colostrum qualities and importance. Practical demonstration of artificial colostrum preparation using fresh egg, warm water, cod liver oil, and castor oil. Discussion on feeding schedules and problem-solving feeding challenges.

Artificial colostrum materials, Mixing equipment, Feeding bottles, Record sheets
Rearing method charts, Clean buckets, Training demonstration materials, Cost analysis sheets

KLB Secondary Agriculture Form 4, Pages 21-22

LIVESTOCK PRODUCTION VI (CATTLE)

Weaning of calves
Calf housing and replacement stock

By the end of the lesson, the learner should be able to:
Describe early and late weaning of calves. Calculate feed requirements using weaning guides.

Study of early and late weaning guides (Tables 2.1 & 2.2). Practical calculations using weaning tables. Problem-solving feed transition challenges and planning weaning schedules.

Weaning guide charts (Tables 2.1 & 2.2), Feed samples, Calculators, Planning worksheets
Calf house models, Design materials, Measuring tools, Management planning sheets

KLB Secondary Agriculture Form 4, Pages 24-26

LIVESTOCK PRODUCTION VI (CATTLE)

Routine management practices
Factors affecting milk composition

By the end of the lesson, the learner should be able to:
Analyze routine management practices in calf rearing. Plan parasite and disease control programs. Explain vaccination schedules.

Q/A on routine practices including parasite control, disease prevention, castration, identification, and dehorning. Practical planning of management schedules and vaccination programs.

Management demonstration materials, Vaccination charts, Identification tools, Practice schedules
Milk composition charts, Breed comparison tables, Analysis worksheets

KLB Secondary Agriculture Form 4, Pages 27-28

LIVESTOCK PRODUCTION VI (CATTLE)

Milk secretion and let-down
Clean milk production

By the end of the lesson, the learner should be able to:
Describe the structure of the mammary gland. Describe milk flow from alveoli to teat canal. Explain milk let-down process.

Drawing and labeling udder structure diagrams. Exposition on lactogenesis and hormone control. Discussion on let-down process, oxytocin effects, and factors affecting milk release.

Udder structure charts, Anatomical models, Drawing materials, Hormone function diagrams
Clean milk checklists, Hygiene demonstration materials, Quality standards charts

KLB Secondary Agriculture Form 4, Pages 30-32

LIVESTOCK PRODUCTION VI (CATTLE)

Milking materials and equipment

By the end of the lesson, the learner should be able to:
List down necessary milking materials and equipment. State purposes of milking equipment. Demonstrate proper use and maintenance.

Brain storming on milking equipment and materials. Practical demonstration of equipment use, cleaning, and maintenance. Cost analysis of equipment investment.

Milking equipment (strip cup, buckets, udder cloths, milking jelly), Maintenance guides

KLB Secondary Agriculture Form 4, Pages 34-36

LIVESTOCK PRODUCTION VI (CATTLE)

Milking procedure and technique

By the end of the lesson, the learner should be able to:
Carry out milking using correct procedure and technique. Outline rules observed when milking.

Practical demonstration of proper hand milking technique. Discussion on milking rules and timing. Post-milking practices including weighing, recording, and cleaning.

Live cow (if available), Milking equipment, Stopwatch, Record sheets, Technique guides

KLB Secondary Agriculture Form 4, Pages 36-37

LIVESTOCK PRODUCTION VI (CATTLE)

Dry cow therapy and milk processing

By the end of the lesson, the learner should be able to:
Explain the concept of dry cow therapy. Name various milk products. Describe basic processing methods.

Explanations on dry cow therapy procedures and importance. Discussion on milk products and value addition. Economic analysis of processing vs fresh milk sales.

Dry cow therapy materials, Milk product samples, Processing demonstration equipment

KLB Secondary Agriculture Form 4, Pages 37-38

LIVESTOCK PRODUCTION VI (CATTLE)

Marketing of milk and beef

By the end of the lesson, the learner should be able to:
Describe marketing of milk, beef and their by-products in Kenya. Identify marketing channels. Calculate marketing costs.

Discussion on milk marketing through cooperatives and processors. Analysis of beef marketing channels (KMC, LMD, local slaughter houses). Cost-benefit calculations for different marketing options.

Marketing channel charts, Processor information, Cost analysis worksheets, Calculators

KLB Secondary Agriculture Form 4, Pages 38-40

LIVESTOCK PRODUCTION VI (CATTLE)

Milk handling and quality control

By the end of the lesson, the learner should be able to:
Describe proper milk filtration, cooling and storage. Explain prevention of milk flavors.

Practical demonstration of milk filtration and cooling to 5°C. Discussion on avoiding bad flavors from feeds and oxidation. Planning quality control systems.

Filters, Cooling equipment, Thermometers, Feed samples, Quality control materials

KLB Secondary Agriculture Form 4, Pages 33-34

LIVESTOCK PRODUCTION VI (CATTLE)

Dairy enterprise planning

By the end of the lesson, the learner should be able to:
Plan complete dairy enterprise operations. Calculate costs and returns for dairy systems.

Integrated planning covering calf rearing, housing, feeding, health, and marketing. Comprehensive cost-benefit analysis. Development of dairy business plans.

Enterprise planning templates, Cost worksheets, Business plan formats, Calculators

KLB Secondary Agriculture Form 4, Pages 21-40

LIVESTOCK PRODUCTION VI (CATTLE)
FARM POWER AND MACHINERY

Record keeping and management
Sources of power in the farm - Human and animal power

By the end of the lesson, the learner should be able to:
Design record keeping systems for dairy operations. Analyze production records for decision making.

Discussion on record importance. Practical design of breeding, production, health, and financial records. Analysis of sample data for management decisions.

Record forms, Sample data, Analysis worksheets, Filing systems
Charts showing power sources, Yoke models, Animal power demonstration materials, Power calculation worksheets

KLB Secondary Agriculture Form 4, Pages 21-40

FARM POWER AND MACHINERY

Wind power, water power and biomass
Solar radiation, electrical power and fossil fuels
The tractor - Petrol and diesel engines
The four-stroke cycle engine

By the end of the lesson, the learner should be able to:
Describe wind power and water power uses on farms. Explain biomass sources including wood, charcoal and biogas. State advantages and disadvantages of biogas.

Discussion on wind power for winnowing and water pumping. Exposition on water power limitations and hydroelectric applications. Study of biomass sources and biogas production process. Analysis of biogas advantages and disadvantages.

Wind mill models, Water power diagrams, Biogas plant charts, Biomass samples
Solar heating system models, Battery demonstration materials, Fossil fuel samples, Energy conversion charts
Engine diagrams, Comparison tables, Engine parts models, Drawing materials
Four-stroke cycle diagrams, Engine stroke models, Demonstration materials, Cycle sequence charts

KLB Secondary Agriculture Form 4, Pages 40-43